Table of Materials

Serial No.	Portion	Material
1	Main body	Polarized rubber
2	Lining	Nylon cord fabric
3	Frame	Hard steel wire
4	Flange	Mild steel

Technical Consition

Nominal core diameter	DN32～DN300(11/4"～12")	DN350～DN500(14"～20")
Working pressure (MPa)	1.6	1.0
Bursting pressure (MPa)	4.8	3.0
Vacuity (mmHg)	750	500
Applicable temp.°C	-20～+115
Applicable media	Air. Compressed air, water, sea water, hot water, weak acid, etc.
Both ends of the joint can be arbitray deflected for free adjustment of axial or lateral displacement.

Table of  Main Parameters of Nominal Core Diameter, Length, Displacement Value and Flange

Nominal core diameter DN		Length L (mm)			Axial displacement (mm)		Lateral displacement (mm)	Angle of deflection (a1+a2)
(mm)	(in.)	S-10	S-10A	S-15	Stretch	Compression
32	(11/4)	95	150	130	6	10	9	15°
40	(11/2)	95	150	130	6	10	9	15°
50	2	105	150	130	7	10	10	15°
65	(21/2)	115	150	130	8	13	12	15°
80	(3)	130	150	130	18	15	12	15°
100	(4)	135/150	150	130	18	19	13	15°
125	(5)	170	150	130	18	19	13	15°
150	(6)	180	150	130	16	19	14	15°
200	(8)	195/205	150	130	16	20	22	15°
250	(10)	230/240	200	130	16	28	22	15°
300	(12)	245/260	200	130	16	28	22	15°
350	(14)	265	200	200	16	28	22	15°
400	(16)	265	200	200	16	28	22	15°
450	(18)	265	200	200	16	28	22	15°
500	(20)	265	200	200	16	28	22	15°
600	(24)	265			16	28	22	15°

Note: For flanges of other standards or non-standard, it is necessary to be agreed upon separately. Please specify standard of fumish diagram and relative parameter, we will manufacture accordingly.